SPECIFICATIONS |
| CAPACITIES |
| Max. swing over bed |
14' |
| Distance between centers |
40" |
| Max. swing over cross slide |
8-5.8" |
| Max. swing in gap |
20" |
| Effective length in gap |
6-1/4" |
| Width of bed |
8-1/8" |
| HEADSTOCK |
| Spindle nose (spindle mount) |
D1-4 |
| Diameter of spindle thru bore |
1-1/2" |
| Spindle taper (with sleeve) |
M.T. #5 (M.T. #3) |
| Spindle speeds |
45-1,800 RPM, 16 steps - 45, 70, 90, 108, 140, 165,
215, 255, 330, 385, 510, 585, 770, 1,170, 1,800 RPM |
| FEEDS & THREADS |
| Longitudinal feeds |
0.0012 - 9.9294"/REV.
(40 kinds) |
| Cross feeds |
0.0003 - 0.01"/REV.
(40 kinds) |
| Inch threads |
4 - 112 TPI (40 kinds) |
| Metric threads |
0.45 - 7.5 mm (22 kinds) |
| Diameter of long. leadscrew |
7/8" |
| Pitch threads of long. leadscrew |
8 TPI |
| CARRIAGE |
| Max. travel of cross slide |
7" |
| Max. travel of compound slide |
4" |
| Max. tool size |
5/8" x 5/8" |
| TAILSTOCK |
| Diameter of tailstock quill |
2-3/4" |
| Taper of tailstock quill center |
M.T. #3 |
| Max. travel of tailstock quill |
4-3/4" |
| MOTORS |
| Power of main motor |
3 HP, 220V, 3 phase, 2-speed |
| Power of coolant pump |
1/8 HP, 220V, 3 phase |
| GENERAL |
| Overall dimensions (LxWxH) |
72"x31"x49" |
| Net weight (LBS) approx. |
2,000 |
|
STANDARD EQUIPMENT: |
- Follow Rest
- 12' Face Plate
- 3-3/4" Steady Rest
- 6" 3-jaw Chuck
- 8" 4-jaw Chuck
- Operation & Parts manuals
- Coolant System
- Halogen Work Light
- Removable Gap
|
- 4-way Tool Post
- Thread Chasing Dial
- Front Pull-out Chip Tray
- Centers & Reducing Sleeve
- Tool Kit with Tools & leveling Pads
- Full Length Splash Guard
- All inch/mm Dual Dials
- Spindle Job Button Control
|
OPTIONAL
EQUIPMENT
|
- 8 Drive Plate
- Taper Turning Attachment
- Quick Tool Changer
- Micro Carriage Stop
|
- 5-C Lever Type Collet Closer
- Digital Readout Installed
- Rotary Phase Converter
|
Design and specifications are subject to change without
notice.
|
